Get Quote

COMOTECH ASIA PACIFIC (HANGZHOU)CO.,LTD

News

  • The difference between traditional wiper and boneless wiper
    Car wiper is an indispensable part of the car dealer. In addition to the cleaning effect, it also protects the driving sight to ensure the safety of driving. As one of the most important parts on the car, the wiper is from traditional wiper to today's boneless wiper, regardless of the material. Or the function is changing. A good wiper can keep you in good view. In fact, most people know that the boneless wiper is better. So where is the good? What is the difference compared with the traditional wiper? Give it to everyone today. Explain it. Traditional wiper The conventional wiper presses the wiper blade onto the window glass through the support points on the skeleton to average the pressure at each support point on the wiper blade. However, the structure of the traditional wiper inevitably has multiple pressure points, which has been unable to adapt to the mainstream design of the modern windshield windshield. Therefore, after using the bone wiper for a period of time, the friction noise is likely to be large, and it is not easy to scrape impurities, water marks and the like. Boneless wiper Boneless wiper blades are relative to conventional wiper blades with metal brackets. The main difference between the two is in the work pressure: there is a bone wiper blade is difficult to withstand greater pressure. The steel sheet in the boneless wiper uses a whole set of conductive steel strips to disperse the pressure, so that the parts of the wiper blade are evenly stressed to reduce the effect of water marks and scratches. The outer layer of the steel sheet is coated with an electroplated layer to make it more resistant to rust. The boneless wiper is simple in design, light in structure and extremely light in weight, which further extends the life of the wiper motor of the car by more than 2 times. The boneless wiper does not need to replace the wiper arm, and only replaces the traditional skeleton wiper blade of the original car, which is more economical. more convenient. Wiper daily maintenance skills 1. Do not dry, do not save the dust on the glass. Do not save the glass water. The debris in the front gear is not as simple as the eyes see. It is easy to scratch the glass without water. 2. Avoid long-term exposure, exposure is the culprit of the most direct damage to the wiper. 3. Regularly clean the rubber strips and clean them regularly to avoid excessive corrosion of the wiper blades. 4. When cleaning in winter, it is recommended to remove the snow and sand before using the wiper. Otherwise, the surface swing will cause deformation and damage to the wiper glass. There is also a more effective way to warm the car and then open the wiper after the snow melts. .

    2022 03/21

  • The price linkage has not touched the contradiction. The coal-electricity linkage is expected to restart.
    The topic of coal-electricity linkage is once again rampant. On March 30, a source quoted sources as saying that China will be expected to restart coal-electricity linkages on April 1st. [Upgrade some provinces and cities to access the Internet and sell electricity prices to improve the losses caused by the continuous rise in coal prices. The status quo." "International Finance News" reporters yesterday to the five major power companies and the China Electricity Council to verify the evidence, they have received a "not known" response. At the same time, energy experts admitted in an interview with the International Finance News yesterday that the coal-electricity linkage can only alleviate the difficulties of the moment, and fundamentally solve the electric power enterprise losses or need in-depth power price reform. When it came to linkage, the coal-electricity linkage policy began at the end of 2004, but the relevant state departments actually implemented this policy only twice, which was 2.52 points in May 2005 and 2.52 points on May 1, 2006. Subsequently, the coal-electricity linkage policy became a "paper". Every time the power company loses money, senior executives and insiders of the power company have called for a restart of coal-electricity linkage. In late March of this year, it was reported that the relevant power companies "hope that the SERC will appeal to the decision-making level to rescue the difficulties faced by power companies through coal-electricity linkages and other means." Lin Boqiang, director of the China Energy Economic Research Center of Xiamen University, told the International Finance News that coal-electricity linkage is a more feasible way to alleviate the dispute between [planned electricity" and [market coal", and it has already been implemented. On the one hand, CEC data show that since 2003, China's coal prices have continued to rise, Qinhuangdao 5500 kcal coal prices have risen more than 150%, sales price increases only 32%; on the other hand, the five major power companies have achieved overall Profitable, but the main business (thermal power generation) is still a large area of losses. Since 2008, the five major power generation groups have accumulated losses of 60.257 billion yuan in three years. Some experts told the "International Finance News" reporter that due to serious losses, the enthusiasm of power companies is now becoming less and less. In the long run, there may even be an "electricity shortage" in the early months. However, analysts pointed out that under the "top priority" of stabilizing prices, there is still doubt about whether this coal-electricity linkage can be implemented smoothly. Yesterday, the reporter asked the relevant parties to verify the matter. A person from Huadian Group told the reporter of the International Finance News that they did not know about it. "The relevant matters can be consulted by the China Electricity Council." However, the relevant person in charge of the China Electricity Council responded to the reporter with "not sure about this matter." Only "itching itching"? Although the implementation of the third round of coal-electricity linkage has not been officially confirmed, many people are not optimistic about the effect of coal-electricity linkage. During the two sessions of the National People's Congress this year, Jing Tianliang, the former chairman of China Coal Energy Group Co., Ltd., said that even if the price of electricity and coal prices are linked, it will not solve the loss situation of power companies. "The bottom of the losses of the five major power companies is the rapid increase in installed capacity in recent years." He exemplified, "As of the end of 2009, the installed capacity of Datang Group exceeded 100 million kilowatts, 4.2 times that of the beginning of the formation." Under the current, the price of electricity will not rise. But even if it rises, or coal-electricity linkage, it will not solve the fundamental problem in the market." Yesterday, Han Xiaoping, chief information officer of China Energy Network, told the International Finance News reporter, "For example, Under the linkage mechanism, the price of electricity will rise and the price of coal will rise. Then, the price of electricity will rise again. However, the problem is that electricity prices are not subject to inflation and other factors, and at the same time, due to marketization, coal prices However, there is no such concern. Therefore, the coal-electricity linkage has not touched the fundamental ills of 'market coal' and 'planned electricity'." Han Xiaoping believes that market-based electricity price reform is the fundamental way, [specifically introducing market competition The mechanism can enhance the enthusiasm of the power enterprise while allowing the downstream consumer electricity industry to have a choice. At the same time, the power grid enterprises assume corresponding responsibilities, supplemented by a long-term trading mechanism. Cui Xinsheng, chief researcher of China Value Index, also said that price linkage is only a technical issue, and its role is limited. It is like [severing itching" and indirectly reflects the interests of power companies. In the past few years, the coal and electricity linkage can also be controlled. Let the electricity companies "share a piece of cake" on the upstream resources.

    2022 03/11

  • How to maintain the wiper maintenance method for the wiper
    There are a lot of accessories in the car that are indispensable, just like the fog lights on the car. This is a must. The foggy weather in Beijing has started again in the fall. If there is no fog lamp, the car is generally afraid to drive. Because the visibility of foggy days is even lower than that of rainy days. There must also be a wiper on the car. Everyone is familiar with it. Generally, the rain wiper is open when the rain is raining. Otherwise, the rain will slide down, which will affect the line of sight. The wiper is a wearing part, so everyone knows how to maintain the wiper and wiper maintenance. Method ? 1, cleaning, this does not need to deliberately go to clean, as long as each time you wash the car, tell the master to wash the wiper of the car, if you wash the car, then clean the wiper, then clean the car's strip Generally, these can be cleaned with a glass of water. It can be washed with water, but when washing, be careful not to use our usual washing powder and other things. These are easily aging. 2. Everyone knows that the inside of the washer is filled with glass water. When there is a problem with the nozzle of the washer, there is no way for the glass water to come out smoothly. At this time, the wiper will cause the line of sight to become more and more blurred when the glass is scraped, so all we have to do is clean the nozzle of the washer, add the glass water in time, check the state of the glass water, and so on. 3, the wiper is made of rubber, if you do not use the wiper, it is easy to scratch the glass of the car. Because it is usually accompanied by small dust when it rains, when the sand appears on the car, the dry brush is likely to cause damage to the glass. So when you need to brush, you must use glass water or something to clean the car glass. How to maintain the wiper, the wiper maintenance method will be finished for everyone, and the wiper will be used for maintenance after a while. In fact, there are a lot of wearing parts on the car, and the warranty period of the general car manufacturer is only six months. So we need to maintain it to extend its service life, which is a way to save money. And if you want to drive a car in the rainy days, you must first check if your wiper is easy to use, otherwise it is easy to accident.

    2022 03/01

  • Some Tips About Your Wiper
    When people using a wiper in the rain, wipers scraping is not clean, which affects traffic safety. When problems happen, the wiper blade is naturally not scraped clean. 1. The oil film appears in the glass If there is a layer of oil film on the glass of your car, the effect is zero even if you scratch the wiper. The wiper doesn`t work, there must be something wrong with wiper or windshield or both. Pouring water on the windshield, one will distinguish it if there is oil film. If you want to clean the oil film windshield, you can use oil removal products in the kitchen. 2. Check whether the wiper is hardening Rubber strip will inevitably aging after wiper`s long-term exposure in the sun, wind and rain. Scraping is not clean, the rubber strip may be aging or there are something dirty, so remove it. 3.Windshield wiper angle problem If the wiper is OK, but not clean, it may be the reason for the wiper angle. The wiper should be debugged to relax the distance between the springs. If you try all above the the methods, and it still doesn`t work, you can get a new wiper. Usually, we must pay attention to the wiper maintenance and don`t change a new one until the wiper has to die. Introduction of Foam Seal and Its Features Foam seal is divided into EPDM foam seal, silicone foam seal, PU foam seal. Foam sealing use microwave curing process of a molding, whose surface is smooth and beautiful and no trace. It has good elasticity and compression deformation, anti-aging performance, retardant performance, low smoke and low toxicity, with stable performance and high dimensional accuracy. Foam sealing strip Features: 1. Lightweight and has a strong toughness 2. Insulation of low thermal conductivity, with superior insulation. 3. Non-absorbent with independent bubble structure, low water absorption. 4. Excellent impact resistance, can be used as cushioning material. 5. Excellent weather resistance. EPDM sponge can withstand ozone test.

    2022 02/21

  • Correct curing method for car wiper
    In July, many places in the country have started heavy rains, which not only made our moods become melancholy, but also added a lot of difficulty to the friends who drove. Especially when it is heavy rain, you must pay attention when you have a low visibility. At this time, the car's wiper played a big role. In the rain, it can effectively remove the raindrops on the glass, so that we can understand the situation ahead and drive better. Today, Beimai.com will explain to you the correct maintenance method of the car wiper . Friends who want to learn can have a look. Wipers are rubber products that, like other rubber products, age. If you want to use it for a long time, scrape clean, you must regularly carry out the necessary maintenance. Everyone said that the maintenance of the wiper is mainly to keep the position of the wiper blade clean, avoid too much dirt on the wiper strip, and avoid foreign objects. If the wiper is mixed with foreign matter, it will not be cleaned. It will not only speed up the aging speed of the wiper strip, but also easily scratch the front windshield. The correct way is that everyone should eliminate the foreign matter and dirt in the position of the wiper strip at the time of washing or timing. First, wash it with water, then wipe the wiper strip with cotton cloth or paper towel, so it is not only cleaned, but also used. The time is still long. What should be the problem of daily use of the wiper? 1, should not change the size of the wiper Some car owners often choose to lengthen 1-2 inches when replacing wiper blades, and feel that the scraping area is larger and the result is better. In fact, this is a fault. The wiper blade is too long to wear the A-pillar trim or the front windshield cover during operation. It can cause resonance and abnormal noise. The special size of the car is the right choice. 2, avoid dry scraping Glass water is very cheap, and the auto parts city buys a few dollars a bottle, don't want to use it. Especially on sunny days, some floating soil should not be scraped, and it should be used in conjunction with glass water, otherwise it will seriously damage the rubber of the wiper. 3, reduce exposure The vehicle is parked under the scorching sun. The temperature of the front windshield is very high. The wiper strips that are close to the glass will accelerate and age due to the high temperature. Therefore, when the vehicle is parked in the outdoor parking lot, everyone can erect the wiper and reduce the contact between the wiper strip and the hot glass to delay the application life of the wiper. The above is the correct maintenance method of the car wiper summarized by Beimai.com. Did you learn it? Generally speaking, the life of the wiper blade is about 2 years, and it can be used for 4 years if it is well maintained. When it is found that it has problems, it must be replaced in time, the wiper blade is not expensive, and it is easy to change. Reduce the safety hazards caused by driving in rainy days and ensure your safety.

    2022 02/07

  • Inductive wiper with rain sensor
    There are many rains in summer, and the wiper is directly related to driving safety. Many car owners have had troubles adjusting the speed of the wiper in the rainy days - too slow to brush the rain, too fast and affect the line of sight, which is not good for driving safety. This article refers to the address: http:// With the increasing popularity of rain-sensing wipers, the troubles of car owners in rainy days can be solved. Wiper automatically adjusts frequency with rainfall Rain-sensing wipers are mainly used in high-end cars and luxury cars. They have become popular in recent years and can be seen in many high-end models of mid- to high-end and even mid-size cars. Because it can greatly improve the convenience of driving in rainy days, it has been widely welcomed by car owners. Song Zhengbin, technical director of 4S shop, told the reporter that taking the Volkswagen model as an example, the rain sensor is hidden behind the rear view mirror and fixed on the front windshield. It is equipped with a forward infrared radiation receiving device composed of LEDs, which determines the amount of rainfall according to the reflection of infrared rays, and then automatically adjusts the frequency of the wiper action. The rain sensor makes stepless adjustment of the speed of the wiper, completely synchronized with the weather conditions, avoiding the driver's trouble of manually adjusting the wiper frequency according to the size of the rain. This function is especially convenient in the rainy summer. The more "smart" wiper speed guarantees safety and minimizes damage to the front windshield by the wiper. At present, the main sensors equipped with rain-sensing wipers are Sagitar, Peugeot 307, Bora, Excelle, Yuda, Accord, etc. The high-altitude models of Shanghai Volkswagen, Tiguan, Touran and LaVida are equipped with rain-sensing wipers. So, how do you know if a car is equipped with a rain sensor wiper? In addition to viewing the configuration table, the owner can also see the combination of the rear view mirror and the windshield. If it is square and has a hole in the middle, then It is equipped with a rain sensor. Motor and wiper life is longer than conventional The car advocate told reporters that when buying a car, the salesman introduced the car as a rain-sensing wiper, but I always thought that this automatic wiper was not very cool. I feel that I can't understand the law. There are often situations where water is not brushed in time, and few rains are swiftly brushed. What is the reason? In this regard, Song Zhengbin introduced that the principle of the rain sensor is to use a sensor composed of a light-emitting diode and a photodiode to determine the amount of rainfall based on the amount of light reflected, and automatically determine the rain interval. So what Mr. Zhang said may be related to light. If the light is good and does not affect driving safety, the speed of the wiper may not increase. On the contrary, even if there is a small amount of water on the glass, there is something to block the light, and the induction wiper will work. In addition, because the rain sensor system has the characteristics of protecting the wiper arm and the wiper, the induction system will not work under the following conditions: 1. Low temperature wiper suppression: When the ignition coil is turned "ON" for the first time, the vehicle does not move. When the outside temperature is lower than 0 °C, the rainfall sensing system does not work. Second, the neutral wiper suppression: When the ignition coil is in the "ON" position, the shift lever is in the "N" position, and the vehicle speed is lower than 8km / h, the rainfall sensing system does not work. As for the maintenance of the rain sensor wiper, Song Zhengbin introduced that there is no difference with the ordinary wiper. Moreover, the intelligent boneless wiper can greatly reduce the jitter wear, and has the advantages of uniform force, anti-sun, light weight, etc. The wiper motor and the blade life are longer than the traditional wiper, and more economical and reliable.

    2022 01/18

  • Wiper maintenance guide
    1. When using a wiper to remove the dust on the surface of the windshield during sunny days, be sure to spray glass water and do not dry it. 2. There are other stubborn and hard dirt on the glass that should be cleaned by hand. These things are very easy to hurt the wiper blade, causing the wiper to be dirty. In severe cases, the wiper motor can also be affected. 3. When the car wash and daily cleaning need to lift the wiper blade, it is necessary to hold the [back" of the wiper blade and gently return it when it is released. Do not bounce the wiper blade back. 4. When using in winter, you should use ice shovel to clear the hail on the surface of the windshield so as not to increase the burden of the wiper. When heavy rain obscures the line of sight, the consequences can be imagined without a dutiful wiper scraping off the unpleasant rain. At this time, you realize that there is a pair of "healthy" wipers that are too late. In order to completely protect traffic safety, you can't be lazy with the maintenance of the wiper. To clean the wiper properly: especially sand, it is the culprit for wiper wear. If you do not pay attention to cleaning, it will cause increased wear and tear of the wiper. Avoid high-temperature exposure as much as possible: The strong summer heat will test the rubber material of the wiper, which will cause deformation or loss of elasticity in the long term.

    2022 01/18

  • Wiper use Raiders - rubber strips to clean up
    In the autumn, the air is dry and dusty. The recent autumn rains increase. The windscreen wiper cannot completely clean the front windshield. Will the glass water sold on the market solve these problems? Is there any way to solve this problem quickly? The reporter consulted Guangqi Toyota on this issue. Feng Guodian, the after-sales manager of Fengdian, believes that the key to the wiper is still to rely on the usual maintenance, free time to remove the sand on the wiper strip, so that the effect of the wiper is good and the service life is longer. Cai Guolu said that many riders` cars are still under warranty, but most of them have begun to replace the wipers. Because the warranty period of the wiper is particularly short, so the replacement will have to save money, the original imported 200 yuan, while the domestic price is about 160 yuan, of course, certainly not the original car factory wiper well. In autumn and winter, the air is dry, and there are a lot of dust on the road. Many owners see the line of sight being affected. They think that there is a wiper, and the front windshield is wiped directly by the water spray. In fact, such an approach is not appropriate. It will lead to shortened wiper life and it will be increasingly difficult to scrape clean front windshields. When the owner notices that the front windshield has a lot of dust, it is best to wash it in advance and scrub the surface of the glass with fine tar particles. If there is no time for the hurry, and dust does hinder the sight, wipe the windshield with a wiper. If you have time, you must remember to remove the fine sand on the wiper strip. The windshield wiper wipes the windshield with fine grains of sand, which is equivalent to sanding the rubber strip with a sanding wheel. It will not be long before it will be scarred and the finish will be reduced. The fur strips will no longer be wiped clean by rain. Therefore, every time you wash your car, you must use your own hands to clean the tiny sand on the wiper strip with a clean towel, because the car washer will not wipe the strip for you. Generally, the original wiper strip is imported. If it is properly maintained, its lifespan can definitely reach 5 years.

    2022 01/18

  • The price linkage has not touched the contradiction. The coal-electricity linkage is expected to restart.
    The topic of coal-electricity linkage is once again rampant. On March 30, a source quoted sources as saying that China will be expected to restart coal-electricity linkages on April 1st. [Upgrade some provinces and cities to access the Internet and sell electricity prices to improve the losses caused by the continuous rise in coal prices. The status quo." "International Finance News" reporters yesterday to the five major power companies and the China Electricity Council to verify the evidence, they have received a "not known" response. At the same time, energy experts admitted in an interview with the International Finance News yesterday that the coal-electricity linkage can only alleviate the difficulties of the moment, and fundamentally solve the electric power enterprise losses or need in-depth power price reform. When it came to linkage, the coal-electricity linkage policy began at the end of 2004, but the relevant state departments actually implemented this policy only twice, which was 2.52 points in May 2005 and 2.52 points on May 1, 2006. Subsequently, the coal-electricity linkage policy became a "paper". Every time the power company loses money, senior executives and insiders of the power company have called for a restart of coal-electricity linkage. In late March of this year, it was reported that the relevant power companies "hope that the SERC will appeal to the decision-making level to rescue the difficulties faced by power companies through coal-electricity linkages and other means." Lin Boqiang, director of the China Energy Economic Research Center of Xiamen University, told the International Finance News that coal-electricity linkage is a more feasible way to alleviate the dispute between [planned electricity" and [market coal", and it has already been implemented. On the one hand, CEC data show that since 2003, China's coal prices have continued to rise, Qinhuangdao 5500 kcal coal prices have risen more than 150%, sales price increases only 32%; on the other hand, the five major power companies have achieved overall Profitable, but the main business (thermal power generation) is still a large area of losses. Since 2008, the five major power generation groups have accumulated losses of 60.257 billion yuan in three years. Some experts told the "International Finance News" reporter that due to serious losses, the enthusiasm of power companies is now becoming less and less. In the long run, there may even be an "electricity shortage" in the early months. However, analysts pointed out that under the "top priority" of stabilizing prices, there is still doubt about whether this coal-electricity linkage can be implemented smoothly. Yesterday, the reporter asked the relevant parties to verify the matter. A person from Huadian Group told the reporter of the International Finance News that they did not know about it. "The relevant matters can be consulted by the China Electricity Council." However, the relevant person in charge of the China Electricity Council responded to the reporter with "not sure about this matter." Only "itching itching"? Although the implementation of the third round of coal-electricity linkage has not been officially confirmed, many people are not optimistic about the effect of coal-electricity linkage. During the two sessions of the National People's Congress this year, Jing Tianliang, the former chairman of China Coal Energy Group Co., Ltd., said that even if the price of electricity and coal prices are linked, it will not solve the loss situation of power companies. "The bottom of the losses of the five major power companies is the rapid increase in installed capacity in recent years." He exemplified, "As of the end of 2009, the installed capacity of Datang Group exceeded 100 million kilowatts, 4.2 times that of the beginning of the formation." Under the current, the price of electricity will not rise. But even if it rises, or coal-electricity linkage, it will not solve the fundamental problem in the market." Yesterday, Han Xiaoping, chief information officer of China Energy Network, told the International Finance News reporter, "For example, Under the linkage mechanism, the price of electricity will rise and the price of coal will rise. Then, the price of electricity will rise again. However, the problem is that electricity prices are not subject to inflation and other factors, and at the same time, due to marketization, coal prices However, there is no such concern. Therefore, the coal-electricity linkage has not touched the fundamental ills of 'market coal' and 'planned electricity'." Han Xiaoping believes that market-based electricity price reform is the fundamental way, [specifically introducing market competition The mechanism can enhance the enthusiasm of the power enterprise while allowing the downstream consumer electricity industry to have a choice. At the same time, the power grid enterprises assume corresponding responsibilities, supplemented by a long-term trading mechanism. Cui Xinsheng, chief researcher of China Value Index, also said that price linkage is only a technical issue, and its role is limited. It is like [severing itching" and indirectly reflects the interests of power companies. In the past few years, the coal and electricity linkage can also be controlled. Let the electricity companies "share a piece of cake" on the upstream resources.

    2022 01/18

  • The wiper is not clean, is it the reason for the wiper or the glass?
    [China Glass Network] I don`t know if the owners have encountered this kind of situation, and they can`t use the wiper several times a year, but they don`t use it for a long time, and find that it`s better to slap it, but it`s more dirty. Why is it? Is it the cause of the wiper or the reason for the glass water? First, the glass is not clean Usually, the car wash does not clean the glass well, and the surface of the glass is adhered with fine tar particles, etc., which will reduce the surface finish of the glass. The rough glass surface will not only be scratched, but also will hurt the wiper strip. Second, the wiper strip is rough If the original wiper strip is properly maintained, its life can reach 5 years. Therefore, pay attention to the usual maintenance, and remove the fine sand on the wiper strip in time. Scraping with these fine sands is equivalent to sanding the wiper strips with a grinding wheel. Soon, the donkey's strips must have been cleaned of rain. Therefore, every time you wash your car, you must use your own hands to clean the tiny sand particles on the wiper strip. In addition, parking in the summer, try not to expose to the sun, because rubber products are more afraid of direct ultraviolet rays, easy to age and hard. If the wiper is found to be unclean, most of them are caused by the roughening of the rubber strip of the wiper. In fact, the rubber strip is not aged and hard. Just think of ways to make the rough rubber strips smooth and polished. Then, if the aging of the rubber strip is found to be mutated, how can it be restored? 1, preferably remove the two wipers 2, prepare a water sandpaper Water sandpaper for 2000 purposes can be bought in the paint shop, the price is very cheap, and it is enough to buy one for several years. Tear the water sandpaper into small pieces, and use a small piece each time. 3. Soak the wiper and water sandpaper with water. 4, sanding the wiper with water sandpaper Note that the strip is like a kitchen knife. You not only have to polish both sides, but also properly grind the front side of the strip. The time does not need to be very long, it will take about 5 minutes.

    2022 01/18

  • The difference between traditional wiper and boneless wiper
    Car wiper is an indispensable part of the car dealer. In addition to the cleaning effect, it also protects the driving sight to ensure the safety of driving. As one of the most important parts on the car, the wiper is from traditional wiper to today's boneless wiper, regardless of the material. Or the function is changing. A good wiper can keep you in good view. In fact, most people know that the boneless wiper is better. So where is the good? What is the difference compared with the traditional wiper? Give it to everyone today. Explain it. Traditional wiper The conventional wiper presses the wiper blade onto the window glass through the support points on the skeleton to average the pressure at each support point on the wiper blade. However, the structure of the traditional wiper inevitably has multiple pressure points, which has been unable to adapt to the mainstream design of the modern windshield windshield. Therefore, after using the bone wiper for a period of time, the friction noise is likely to be large, and it is not easy to scrape impurities, water marks and the like. Boneless wiper Boneless wiper blades are relative to conventional wiper blades with metal brackets. The main difference between the two is in the work pressure: there is a bone wiper blade is difficult to withstand greater pressure. The steel sheet in the boneless wiper uses a whole set of conductive steel strips to disperse the pressure, so that the parts of the wiper blade are evenly stressed to reduce the effect of water marks and scratches. The outer layer of the steel sheet is coated with an electroplated layer to make it more resistant to rust. The boneless wiper is simple in design, light in structure and extremely light in weight, which further extends the life of the wiper motor of the car by more than 2 times. The boneless wiper does not need to replace the wiper arm, and only replaces the traditional skeleton wiper blade of the original car, which is more economical. more convenient. Wiper daily maintenance skills 1. Do not dry, do not save the dust on the glass. Do not save the glass water. The debris in the front gear is not as simple as the eyes see. It is easy to scratch the glass without water. 2. Avoid long-term exposure, exposure is the culprit of the most direct damage to the wiper. 3. Regularly clean the rubber strips and clean them regularly to avoid excessive corrosion of the wiper blades. 4. When cleaning in winter, it is recommended to remove the snow and sand before using the wiper. Otherwise, the surface swing will cause deformation and damage to the wiper glass. There is also a more effective way to warm the car and then open the wiper after the snow melts. .

    2022 01/18

  • Little wiper has a big effect
    The wiper is equivalent to the lens of the human eyeglasses. Whenever the lens is blurred, we must clean and wipe it so that we can see the previous route. The same is true for the wipers. Many owners think that it is only necessary for the rain genius to use a wiper. This is just its simplest function! Don't look at the small wiper, in fact, the effect is great! Do not ignore it, and many times it is not necessary! Wiper structure Generally consists of wire plug, wiper arm, wiper blade assembly, rubber brush, brush holder, brush holder, wiper arm mandrel, wiper base plate, motor, mounting frame, deceleration mechanism, drive Rod system, driving lever hinge, wiring harness, wiper switch and wiper switch knob. The role of wipers The most important thing is that it can remove the rain, snow and dust on the windshields that obstruct the sight. Therefore, it plays an important role in driving safety. General wiper can be divided into mechanical type, vacuum type, pneumatic type, hydraulic type and electric type according to its driving mode. Modern electric vehicles generally use electric wipers, which have the advantages of simple structure and convenient control. If it cannot clean the rain on the windshield, you will drive like a blind person and lose security. According to relevant data, the traffic accident rate caused by the unclear vision caused by the aging of the wiper blades is about five times higher than usual. Therefore, the safety of the wiper blade can not be ignored. In the case of a suitable wiper blade, no traces of water can be left on the glass after the scraping, because the water marks are reflective. If it is nighttime, these water marks reflect the lights of the opposite vehicle and interfere with the driver's eyesight; In one case, the wiper blade can clean the water traces normally. However, due to the fact that the glass is usually not cleaned, the glass will be covered with a layer of oily material. After the water is caught, the wiper blades will be scraped and the glass will be white and misty. Poor. Finally, the mechanical performance of the wiper blade is mainly reflected in two aspects. Due to the damage of the wiper motor, it either does not work or it cannot be changed, which also easily causes troubles. Now many car wiper blades have a variable speed function, the owner can choose the speed according to the size of the rain, but once the speed can not be met, when it encounters heavy rain and the wiper blade can't wipe off the rain, it can also cause the driver to look away. Unclear, and thus bring security risks. .

    2022 01/18

  • Rain-sensing wiper improves driving safety
    The wiper is directly related to traffic safety. Many owners have had the trouble of adjusting the speed of the wiper over the rainy days - too slow to brush the rain, too fast and affecting the sightlines, which is detrimental to driving safety. With rain-sensing wipers becoming more and more popular, the owner's troubles in the rain can be solved. Rain-sensing wipers are mainly used in high-end cars and luxury cars. They have become popular in recent years and can be seen in many high-end vehicles with medium-to-high-end or even mid-range cars. Because it can greatly improve the convenience of rain driving, it has been generally welcomed by the owners. Take the Volkswagen model as an example. The rain sensor is concealed behind the rearview mirror and fixed on the front windshield. It is equipped with an LED forward infrared transmitting and receiving device to determine the amount of rain according to the reflection of infrared rays, and then automatically adjust the frequency of the wiper action. The rain sensor makes stepless adjustments to the wiper's operating speed, which is in complete synchronization with the weather conditions, avoiding the need for the driver to constantly adjust the wiper frequency manually according to the size of the rain. This feature is particularly convenient during rainy summer months. A more [smart" wiper speed ensures safety and minimizes windshield wiper damage to the front windshield. So, how do you know if a car is equipped with a rain-sensing wiper? In addition to viewing the configuration table, the owner can also look at the junction between the rearview mirror and the windshield. If it is square and has a hole in the middle, it is equipped with a rain sensor. The principle of the rain sensor is to determine the amount of rain based on the amount of light reflected by a sensor consisting of a light emitting diode and a photodiode, and automatically determine the interval for rain. If the light is good and does not affect the safety of the vehicle, the wiper speed may not increase. Conversely, even if there is a small amount of water on the glass, something will block the light and the sensor wiper will work. In addition, because the rain sensing system has the characteristics of protecting the wiper arm and wiper, the sensing system will not work under the following conditions: 1. Low temperature wiper suppression: When the ignition coil turns to [ON" for the first time, the vehicle does not move, When the outside temperature is lower than 0°C, the rain sensing system does not work. Second, the neutral wiper suppression: When the ignition coil in the "ON" position, the shift lever in the "N" position, and the vehicle speed is less than 8km / h, the rainfall sensing system does not work.

    2022 01/18

  • How to maintain the wiper maintenance method for the wiper
    There are a lot of accessories in the car that are indispensable, just like the fog lights on the car. This is a must. The foggy weather in Beijing has started again in the fall. If there is no fog lamp, the car is generally afraid to drive. Because the visibility of foggy days is even lower than that of rainy days. There must also be a wiper on the car. Everyone is familiar with it. Generally, the rain wiper is open when the rain is raining. Otherwise, the rain will slide down, which will affect the line of sight. The wiper is a wearing part, so everyone knows how to maintain the wiper and wiper maintenance. Method ? 1, cleaning, this does not need to deliberately go to clean, as long as each time you wash the car, tell the master to wash the wiper of the car, if you wash the car, then clean the wiper, then clean the car's strip Generally, these can be cleaned with a glass of water. It can be washed with water, but when washing, be careful not to use our usual washing powder and other things. These are easily aging. 2. Everyone knows that the inside of the washer is filled with glass water. When there is a problem with the nozzle of the washer, there is no way for the glass water to come out smoothly. At this time, the wiper will cause the line of sight to become more and more blurred when the glass is scraped, so all we have to do is clean the nozzle of the washer, add the glass water in time, check the state of the glass water, and so on. 3, the wiper is made of rubber, if you do not use the wiper, it is easy to scratch the glass of the car. Because it is usually accompanied by small dust when it rains, when the sand appears on the car, the dry brush is likely to cause damage to the glass. So when you need to brush, you must use glass water or something to clean the car glass. How to maintain the wiper, the wiper maintenance method will be finished for everyone, and the wiper will be used for maintenance after a while. In fact, there are a lot of wearing parts on the car, and the warranty period of the general car manufacturer is only six months. So we need to maintain it to extend its service life, which is a way to save money. And if you want to drive a car in the rainy days, you must first check if your wiper is easy to use, otherwise it is easy to accident.

    2022 01/18

  • How to open a wiper? Precautions for using a wiper
    When it rains, the rain hits the glass in front of the car, affecting the driver's line of sight. A wiper is needed to brush the water away so that the driver can see the route in front of him and it will not be dangerous. However, some people belong to novice drivers. When they practice driving cars, they are all sunny. They do not have the opportunity to open the wipers. When they get a driver's license, they start to rain, and they do not know how to open the wipers. So, how to open the wiper? How to open the wiper: The wipers are usually arranged on the right side of the steering wheel. It is only necessary to gently open the upper part of the rod with your finger and turn it clockwise. The wipers are divided into multiple gears, which rotate to the first gear as the intermittent gear, the second gear as the low gear, and the third gear as the high gear, and use the number of gears according to the amount of rain. Wiper precautions 1. Do not use a wiper when there is no rain or no water in front of the glass. If the air blows, the parts and motor above the wiper will be damaged, affecting its normal function. 2, the use of wipers should not be too frequent. The wipers are designed to scrape the rain off the glass and allow the driver to have a clear line of sight. If the rain in front of the glass does not interfere with the line of sight, then do not use it; the amount of wipers should not be too frequent and the number of wipers used frequently It will cause it to be damaged. 3, daily inspection. When the wiper is not in use for a long time, you can spray some cleaning liquid on the glass, and then open the wiper to see if its scraping motion is smooth, stable, there is no noise, etc.; if you find the wiper has a greater pressure on the glass, Make adjustments in time so that the wiper can avoid scratches on the glass. 4. The dirt on the glass must be cleaned in time. If there is dirt on the glass, solid debris and other things will increase the difficulty of the work of the wiper, it will also cause the wiper to wear, affecting its life. Therefore, regular cleaning of the glass. How to open the wiper? If you use the wiper, you will find that it has quality problems.

    2022 01/18

  • With wiper and boneless wiper
    Vehicle wipers have bone and boneless so-called "bone" refers to the skeleton that is supported on the rubber strip. Most of the wipers are iron connections, which have high strength and are not easy to be deformed. When they are used, they have a large downward pressure, so they have a wider application area, and they have a longer life span and lower cost. The boneless wipers are not really skeleton-free. They only use one-step molding to shape the plastic skeleton. Some larger-sized wipers also need to be matched with steel cards to achieve perfect results. Therefore, if you buy a wiper, your model will not be produced. The riders who support the model without bone wiper should pay attention to it. Not all wipers are suitable for your car. The curvature of different glass is different. The original shape of the wiper is different, and the bad effect is worse. The general-purpose wipers are often not ideal, no-name special-purpose refers only to the buckle and the length of your car's other skeletons and general-purpose type is not much difference, we must pay attention to the wipers do not just change, or not use equal to a waste of money!

    2022 01/18

  • wiper system
    The appropriate wiper system for any vehicle A windshield wiper system comprises a wiper drive and two wiper arms. The drive moves the two wiper arms at a certain angle across the windshield, providing a clear view for the driver and passenger. A specially-shaped rubber wiping lip ensures an optimal wiping result. Visibility is further improved by the new generation of Jet Wiper arms. With the Jet Wiper, the washer fluid is applied exactly where it is needed, i.e. right in front of the wiper blade. The spray nozzles are integrated in the wiper arm, which improves cleaning performance, extends the field of vision and permits a clear view. Unlike conventional systems, no expansive spray mist is generated. This significantly improves visibility even at higher speeds. A rear wiper system comprises a rear wiper drive, which only powers a single wiper arm. The system can be mounted to the top or bottom of the rear window. The mechatronic front wiper system A new mechatronic reversing system can now be used to clean the windshield with two wiper arms, whereby one wiper arm is powered directly and the other indirectly using a connection link assembly. With this technology, fewer components are required which means a considerable reduction in weight and a smaller box volume under the hood.

    2018 08/20

Email to this supplier

-
SEND

Browse by: All Products | China Suppliers Service is provided by Bossgoo.com

Copyright © 2008-2024 Bossgoo Co., Ltd. All rights reserved.

Your use of this website constitutes acknowledgement and acceptance of our Terms & Conditions